Weber 32/36

[geezer101]

Sorry but it looks like the Airtex E8004 isn't suitable for the Weber. You need a fuel pump that can handle more than 35 gph but only 3.5 PSI max pressure (the Airtex E8004 specs state 6PSI and 35 gph). Keep in mind that the Weber needs a bit more of an aggressive ignition tune to make the most of it - a good high output ignition coil and adjusting the timing to not only ensure you get a good, clean burn but to also get the engine to punch more from mid range rpm upwards. Something like this should be more suitable http://www.ebay.com/itm/1-x-42S-Univ...JY2VFc&vxp=mtr
Some sites recommend a pump like a Carter rotary pump with an output of 60-70 gph but I think that would be more for competition/racing as the carb would be always drawing a high CFM rate.