Results 1 to 15 of 15

Thread: Any Tips on Tune Up?

Hybrid View

  1. #1

    Array
    Status
    Offline
    Join Date
    12-13-2014
    Posts
    210
    Location

    redding ca
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    4G64
    check your ecm before doing anything else! what your are describing sounds like blown caps.

  2. #2

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    424
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    Dodge V8
    Quote Originally Posted by finalfighter View Post
    check your ecm before doing anything else! what your are describing sounds like blown caps.
    Mine did exactly that with blown caps.

    It is AWFUL to pull the ECU but take you time and it will come out.

    Open the ECU and look for cap that are bulged up or leaking. They can leak from the top OR bottom and wipe out the traces on the PCM.
    If it have done they you can either have it repaired or you will need to replace it.

    My truck has had AT LEAST 3 ECU failures due to caps. I installed the third ECU that was a repaired ECU and now it runs VERY well.

    The caps will have an X on the top. look for those to open up (venting) or bulging.

    My coil also failed. I replaced it.

    I pulled the EGR and soaked it in carb cleaner. BIG difference.

    I pulled seafoam into the engine through the vacuum hose on the back of the intake... it helped.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •