Results 1 to 25 of 25

Thread: 4D55 Cam and Rocker are Reassemble!

Hybrid View

  1. 10-16-2018 09:32 AM #1
    dancinggecko
    Senior

    Array
    Status
    Offline
    Join Date
    06-12-2015
    Posts
    185
    Location

    Owensboro, KY
    Vehicle

    1991 Dodge Ram 50
    Engine

    4D56-T
    If it is coming off of the shutoff you may want to check the copper washers on it before you tear too far into the pump. There are several fittings on these pumps that are only sealed with copper, if they are scratched or too badly compressed they can leak.
    Reply With Quote Reply With Quote
  2. 10-16-2018 05:16 PM #2

    gard's Avatar
    gard
    Sophomore

    Array
    Status
    Offline
    Join Date
    06-24-2018
    Posts
    70
    Location

    Lincoln, AR
    Vehicle

    1984 Dodge Power Ram 50
    Engine

    4D55-T
    Quote Originally Posted by dancinggecko View Post
    If it is coming off of the shutoff you may want to check the copper washers on it before you tear too far into the pump. There are several fittings on these pumps that are only sealed with copper, if they are scratched or too badly compressed they can leak.

    Is there a source for replacements? I have the original pump, it was fine except it didn't pull fuel well. But no leaks. Is using the fittings from it an option?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules