a starion 2.6 turbo bolts to your manifold. Get the downpipe elbow too. You'll need to route feed and return lines
The sensor in the truck distributor can run the DSM turbo electronics.
I think LSR Mike had it detailed on his page at one point (can't find it now)
http://www.mightyram50.net/vbulletin...8v-or-16v-head

used mitsu DSM electronics r risky.... they're 27 years old - ecu, mafs, coil packs/ignitor, etcc
for my 2.4 turbo i'm purchasing a prebuilt & loaded megasquirt from a starion clubmember
Very reasonable priced standalone. Should run well enough to get u started... then learn to tune
go with whatever injectors suggested for your goals. Used DSM 450cc or RX7 550cc r common
http://www.mightyram50.net/vbulletin...urbo-potential


i'd at least run a td06/18g (upgrade stock 12A core or bought used from starion forum). 12A too small imo, but ok to start
that aussie manifold flow ok up to ~250hp