Quote Originally Posted by manorchurch View Post
= rough idle. Spray vacuum pump oil on the manifold gasket seams -- not carb cleaner. It stops up leaks for a few minutes and smoothes the idle before the oil gets sucked in and burned. Rough idle, imho, is rarely a vacuum leak in the manifold and carb mount. Whoever mentioned refreshing the vacuum lines is right -- but sometimes it's one bad plug wire. Little bit of arc-over through the cable insulation, little bit of miss. You can usually see the spot at night when lights are out.

I just did plugs and plug wires you think i might take em out and check em. is it possible to have bad wires out of the box. ill look for the vacume pump oil at auto zone and give it a shot. Throttle pivot sleeve bearing, where is that located and how do i check it. I am 100 percent sure on changing the carb i think camoit is going to come down and give me a hand (if i am lucky ) when i do it, get rid of the vacume line and remove that problem from the situation.