cracking the ecu

[Can1991Ram]

From what I have read..the ecu chipset in our ecu is not reflashable.
But....the chip could be removed and replaced if the map can be cracked..modified and put on a new chip.
Anyone done this yet?

[pennyman1]

LSR Mike had an ECU that had removable chips - He sold it to Noahwins I think

[noahwins]

...and then I gave it to Rahtid.

[Can1991Ram]

So it's already been cracked

[noahwins]

DSM ECUs are very similar to our trucks' ECUs. Same Sirius engine family.

http://www.ecmtuning.com/wiki/epromid

[Can1991Ram]

That is really cool if we could use that software on our ecu....

[Rahtid]

you would use the tuner pro software and the moates ostrich to modify the ecu to your needs http://www.tunerpro.net/ http://www.moates.net/ostrich-20-the-new-breed-p-169.html?cPath=95 http://www.ebay.com/itm/1985-1988-1992-GM-Moates-Ostrich-2-0-USA-NEW-/252054817891?hash=item3aafa34c63&vxp=mtr

[noahwins]

How does the Ostrich work with Mitsubishi? You need a GM MAF?

[pennyman1]

Or maybe contact these guys - they make chips for 1g and 2g talons, eclipses, and other mitsu vehicles: http://www.ebay.com/itm/261164035110?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[Rahtid]

the Ostrich plugs in to the mitsubishi eprom no need for maf translator unless you want to use one,
14581
here is it installed on a old evo 1 -3 ecu similiar to or truck and other mitsubishi vehicles until 97-98
http://www.lancerregister.com/showthread.php?t=168143
and pluged into a honda ecu below, it works on a lot of different vehicles

[Can1991Ram]

what software do you run with the ostrich

[noahwins]

Is there an Ostrich guide or manual?

[Rahtid]

the software you need is not for the ostritch, Tunerpro is what you use to make changes to the ecu
https://www.youtube.com/watch?v=HpUaeiJYk3I

[LSR Mike]

The guys at DSMLink did my custom e-Proms, they do the eclipse stuff. I only had injector sizes and rpm limits changed, before I went to a AEM unit.

[Can1991Ram]

It would be nice to able to adjust my own fuel trim..knock and mapping . When you send it out you aren't data logging..it would be a map based on guesses.

[noahwins]

Check out Apexi Power FC for early Evos. Should work.

[Rahtid]

You can datalog from the factory obd1 connector,http://m.ebay.com/itm/Mitsubishi-USB-DSM-Scanner-Cable-1G-Eclipse-Datalogger-4g63-ALDL-OBD1-PLUG-/181782627508?nav=SEARCH
I guess you can use the power fc