I know there are other threads, but i cant seem to locate the problem...
I was having issues with the engine randomly turning off. Sometimes it would fire up right away, other times it did not. Now my motor is turning over but is not getting spark from the coil at all. When it was running the timing was 5 degrees BTDC and it was running good (aside from randomly dying). The leads to the coil are getting 12v and when cranking, one of them is dropping. High voltage terminal is showing 11.3 ohms (which is within spec per the haynes manual). I have replaced pretty much everything in this order...
Plugs
Wires
Cap and rotor
Entire disputer
Coil (twice)
J121/LX626 power transitor (ICM)
Main relays (coming off battery)
ECM relay
ECM
Other parts recently replaced prior to this issue (which i dont think would cause this issue, but more info the better i guess):
o2 sensor
EGR
Fuel pump
Ive gone over the wiring numerous times and i am afraid im at wits end here. Hopefully someone can help me think of something i have missed?
Bookmarks