I’ve recently acquired a 1992 max with the 2.4 engine in it that I’m currently in the process of rebuilding I just got it back from machine shop punched it out 20 over due to cylinder pitting. I had ordered new main bearings a rod bearings, I’ve encountered my 1st of I feel will be a few issues. My question is the main bearings it calls for are incorrect they thrust bearing is to narrow a the other bearings the oil hole dosent completely line up. I ordered ms2039p clevite tri layer bearings. The rod bearings also seemed to be a little narrow compared to the ones in the engine. Any help on the bearings I need to order or how I need to search for the correct ones would be greatly appreciated I’ve tried an have just come up with the same thing.