Results 1 to 18 of 18

Thread: Cylinder leakdown test results/comments

Hybrid View

  1. #1

    Array
    Status
    Offline
    Join Date
    11-29-2011
    Posts
    50
    Location

    Philippines
    Vehicle

    1986 Mitsubishi Mighty Max
    Engine

    4D56-T
    i forgot to tell you also that the last time i did the head gasket, i found a vertical scratch on the cylinder liner #2 which is the most probable cause of the engine's blow-by. remaining 3 cylinders were clean.

    maybe it's not with the power source. it could be with the drivetrain. have you checked your clutch or A/T? or the brakes (dragging)?

  2. #2

    Array
    Status
    Offline
    Join Date
    02-29-2012
    Posts
    9
    Location

    Thunder Bay
    Vehicle

    1992 Mitsubishi Strada
    Engine

    4D56-T
    i've read lots on the 2-stroke additive, looks like something good to do, although I haven't done it yet.

    I'm going to do my brakes shortly. I have the squeal from the front pads. and i know the rear shoes are nearing their end.

    I also have a growl from somewhere in the driveline. I think my steady bearing rubber housing (along the 2 piece rear driveshaft) is going again. although this just started happening, so I don't think it's part of my problem.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •