Results 1 to 6 of 6

Thread: Gen 1 4x4 brake swap?

  1. #1

    Array
    Status
    Offline
    Join Date
    07-25-2019
    Posts
    21
    Location

    Eureka California
    Vehicle

    1985 Mitsubishi Mighty Max
    Engine

    G54B

    Gen 1 4x4 brake swap?

    ive done a bit of looking and all the info on brake interchange seems to be between 2wd trucks. For us 1st gen 4x4 guys what is there? Are the calipers swappable between 4x4 2nd to 1st gen? I have a caliper seized up and the entire front end of my truck in pieces, i'd like to put it back together nicer than it was before, the braking always left something to be desired with the 31" coopers i run on mine. Can i use the brake booster/master cylinder out of a new truck also? Mine is an 84, and the reservoirs are starting to disintegrate somewhat id like to bring the whole system up a decade at least.
    Attached Images

  2. #2

    Array
    Status
    Offline
    Join Date
    08-14-2023
    Posts
    10
    Location

    Armidale australia
    Vehicle

    1984 Mitsubishi L200
    Engine

    G63B
    I used 1998 challenger (aus) front hubs , discs and calibres on my ‘84 l200

  3. #3

    Array
    Status
    Offline
    Join Date
    10-02-2023
    Posts
    13
    Location

    PNW
    Vehicle

    1984 Dodge Ram 50
    Engine

    G54B
    That is the US equivalent to the montero correct?

  4. #4

    Array
    Status
    Offline
    Join Date
    08-14-2023
    Posts
    10
    Location

    Armidale australia
    Vehicle

    1984 Mitsubishi L200
    Engine

    G63B
    I’m not sure

  5. #5



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,823
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    I think in the archive board there is a thread about doing the swap. You can find the archive in the archive tab at the top of the page.
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  6. #6

    Array
    Status
    Offline
    Join Date
    07-17-2024
    Posts
    1
    Location

    Dundee, Oregon
    Vehicle

    1986 Dodge Power Ram 50
    Engine

    G54B
    I followed a thread on here about swapping Montero front brakes. I did the swap using 1999 Montero front rotors and calipers. It works great. It was not difficult and definitely an improvement.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •