next on the list, is to find a fuel pump that fits the bill ...

rockauto fp arm is way too thick, won't pass between the head bolt & the jet air valve body ...

yes, the mikuni carb MUST come out from the manifold ... 4 bolts, 1 nut ...

no need to disconnect the carb, just carefully push it aside to the back, with hoses/wires connected ...

the original fp is kyosan denki 3F03D 1-5 made in japan

i think that the fp oem magic pn number is #1093 ... arm made of two thin plates welded together

solid arm is TOO THICK ...

but where to find one ?