Results 1 to 3 of 3

Thread: OEM style fastener source?

  1. #1

    Array
    Status
    Offline
    Join Date
    04-11-2023
    Posts
    25
    Location

    Eugene, OR
    Vehicle

    1985 Dodge Power Ram 50
    Engine

    Other

    OEM style fastener source?

    Hey guys, I'm looking for a site that has OEM style hardware, screws, plastic fasteners, etc.

    I'm specifically looking for the screw grommet that fits in the holes for the OEM speaker location. I designed and 3D printed a 6.5" speaker adapter that mounts to the 4" speaker mounting holes and does not require cutting the door panel up for speaker fit. I've installed 1 but don't have the screw grommets for the other side

    I measured the holes in the door for the screw grommet, they are about 6.5mm square, I found screw grommets for 8x8mm and 7x7mm holes. I'm wondering if the 7mmx7mm will fit...

    Does anyone have a favorite supplier for OEM style plastic clips, etc and screws?

    I need these:

    Screw Grommet #6 Screw Size -Honda & Toyota (clipsandfasteners.com)

    The site looks pretty awesome but I haven't dug into it a lot.

    Automotive Retainers, Clips and Fasteners - ClipsAndFasteners.com

  2. #2



    Array
    Status
    Offline
    Join Date
    03-06-2018
    Posts
    506
    Location

    Tucson, AZ USA
    Vehicle

    1987 Dodge Ram 50
    Engine

    G54B
    FWIW looks like this kit includes 30 pcs. ea. of a couple different screw grommets, also retainer clips for the door trim cards and more, but might be overkill if you don't expect to need that many or any of the other included fasteners:

    https://www.ebay.com/itm/232800265368
    1987 Dodge Ram 50 4G54 RWD longbed ("Elmo")
    1979 Lancia Beta Zagato spider ("Lola")
    1982 Lancia Beta Zagato spider ("Luigi")

  3. #3

    Array
    Status
    Offline
    Join Date
    04-11-2023
    Posts
    25
    Location

    Eugene, OR
    Vehicle

    1985 Dodge Power Ram 50
    Engine

    Other
    Thank you for the reply. I ended up finding a part that looks like it will work with the 6.5mm hole. The screw grommet says it is 7x7mm, fits 6mm hole.

    20 Nylon Nut #8 Screw Grommet Clip Fit 6mm Hole For Mitsubishi Fits For Nissan | eBay

    Screw Grommet #6 Screw Size -Honda & Toyota (clipsandfasteners.com)

    I ended up buying both.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •