1993 2.4l Head Bolts

[tylerward816]

Hey all, I've been working on my 93' MM, currently in the process of replacing most gaskets on the 2.4l as it was leaking oil from just about everywhere it could. I have all of the parts I need except the cylinder head bolts. I have searched on the forums and found a couple links that were longer good for forklift 8v head bolts. Unfortunately when i search, 99% of the time I am finding bolts for the 16V head. Another concern is I do believe in 93 they changed to a stretch style bolt. Rock auto has the same bolts posted for the 93' as previous years with the allen key style head. The bolts that came out of mine are the 12 point / spline style head on the bolt. I finally found a set of fork lift bolts at the link here but I am unsure if they are right. Kind of pulling my hair out searching for these. I really want to avoid re using the old ones as this engine has 231K miles. If anyone has any idea if the bolts at the link below are correct that would be appreciated. I do know it was said in a thread I read a while back that the 93-96 bolts are re usable but again I would like to replace if possible. Thanks!





https://www.pdkengines.com/product-p...d-bolt-set.htm

[claych]

93' used both TTY (torque to yield) and Regular bolts.
Info -- HERE, POST #4 -- still available, and looks like about
$30 total cheaper than your link shipping included!