My Electric fuel pump install

[mopar_ja]

Bought a 6x18, 22 gauge sheet metal from Ace Hardware like $8, $9 dollars.

hold it up in front of bed brackets centered ( i eye balled it ) mark sheet metal with sharpie top and bottom where it intersects with brackets. use ruler draw line connecting your two marks, now you have rough angle where to bend. Now use pliers, hammer, vise, workbench top anything you can get some sort of straight edge. Bend sheet metal on the drawn angle take your time bend a little at time unless you own or have acess to ( press break ).

DSC09732.jpg Take back to truck test fit. i held it in place with vise grips marked where the front edge of bed bracket runs down the length of new fuel pump bracket and cut off excess, it should look something like this when excess is removed.

Little line far left is fuel return, next is line to carb then from tank.