Okay. Well lets start with when I got off.

I showed up at the machine shop inquiring on some nuts for the studs I bought to use as a temp till the arp's come in. Picked up that, washers, my cams, cam assembly lube, and some arp thread lubricant.

Got home, removed stubborn head studs, cleaned up the studs, installed thermostat housing, oem cam and cam gears with the new cam seals that were on the webcams, installed arp studs on block with the lubricant to make sure the threads are lubed and the studs thread without resistance. Removed studs, installed head and gasket, reinstalled arp studs, and tightened so I can torque to specs tomorrow.

Still need to do: remove turbo off talon, install turbo, install intake manifold, install exhaust manifold, install down pipe, install fuel rail with injectors, install timing belt.