Results 1 to 2 of 2

Thread: Front lower control arm rear bolt removal (1985 D50 4x4)

  1. #1

    Array
    Status
    Offline
    Join Date
    11-11-2021
    Posts
    4
    Location

    Ste. Anne, MB
    Vehicle

    1985 Dodge Power Ram 50
    Engine

    G54B

    Front lower control arm rear bolt removal (1985 D50 4x4)

    Hi everyone, first post here.

    I need some help, I'm trying to remove the lower control arm on my D50 (4x4) and it's got the torsion bar springs. I removed the torsion bars but I don't see the other end of the bolt for the bushing. Am I supposed to press it out? I'm trying to use a ball-joint press but with no luck, it doesn't want to budge. I attached a photo of the control arm (the frame is stripped and upside down).
    Attached Images

  2. #2

    Array
    Status
    Offline
    Join Date
    10-03-2022
    Posts
    2
    Location

    Bay Area, CA
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    I.D.K.?
    If you haven't done this yet, you need to keep the torsion bar end connected to the control arm. The torsion bar will hold the key bolt in place when loosening the nut.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •