This is where the fuel tank will sit. It has 2x2" square tubing running across the front and back of it.
Using the OEM sending unit, had to bend the arm to "calibrate it" for the new tank haha. The fuel filler cap once fully threaded in should fit just below the bed of the box. Planning on putting a cutout into the box bed mounted on hinges with some clasp of some sort to hold it closed. The square piece is removable, this is how the fuel pump is accessed.
I decided to make the fuel pump mount bracket that will be bolted in place. This way in the future if I ever change fuel pump designs I can just make a new bracket and bolt it in compared to trying to modify a bracket in place or weld in place in a small access hole. The reason for the odd mount, is to run 2 pumps if required in the future too. Only plan on running 1 for now.
Reply With Quote
Bookmarks