-
1987 g54b carb help
I’m new to the site. Just purchased a 1987 power ram 50. I have disassembled the carb cleaned and I am currently trying to reassemble. My question is I took pics but lost them and I have 4 springs. I’m not sure which goes where. Accelerator pump mixture valve and so on. Please help. Downloaded chilton manual but it just says springs. It don’t say what length or size.
-
Associates Degree
Array
Welcome to the site. Can you post pictures of the four springs? The second gen Mikuni has a number of springs, some internal and others external. Pictures will help identify the springs or where they belong.
-
My Mikuni is a Gen 1 DID-TF 708 not the same as yours --
sub egr has a small spring & small ball bearing
the bowl vent valve electromagnet actuator has an internal spring against the diaphragm
the dashpot has an internal spring
many photos of my Mikuni rebuild here:
http://www.mightyram50.net/vbulletin...uni-carburetor
Good Luck & at least your carb and parts for it are still readily available in most auto parts stores
For any mounting bolts to manifold that won't tighten properly or stay tight ~ try using a little wrap on the threads with plumbers teflon tape ~ sparingly, it won't need much...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks