I forgot to mention I heated up the dust cover while driving the wood mold into it.
This is a new flywheel new starter situation, not that a new starter couldn't be bad. "Starting Issues" thread I changed out the turn signal and wiper control with one from the JY. Reconnected a wire that burnt up at the mating point on the old one. My idea is old wiring in general being old. Might be that tiny piece of plastic that fell out when I removed the ig switch to look it over.

Edit I drove it a bit and it shifts nicer and seems smoother and did not get hot. I thought the gauges had failed again but the fuel tank was full and the temp was all the way over left. When I stopped before I shut it down I was resetting the radio it started to get warm. Maybe that pin missing and rounded over ring gear from the other flywheel wasn't the only thing wrong with it.