Quick question, dont know if its a dumb one, but all logic is pretty skewed at this point. I was taking a look in my Haynes manual, and I noticed the distributor rotation diagrams, which show the 2.6L to have the #1 plug location on the lower left hand side of the distributor cap. When looking at my distributor cap, my #1 is located in the upper left hand side. The only memory Id have of the original position of the cap is lost forever as I had bumped it & knocked it off when I was changing the t-stat. I assumed there was only one way for it to sit though, so this is how I've installed it. Somebody please explain this illustration to me!!!20200706_215028.jpg