Results 1 to 19 of 19

Thread: 1988 mighty max carburetor vacuum diagram needed(actual photos)

Hybrid View

  1. #1

    Array
    Status
    Offline
    Join Date
    07-23-2018
    Posts
    482
    Location

    Seattle, WA
    Vehicle

    1988 Dodge Power Ram 50
    Engine

    G54B
    Welcome to the site. Here's a post with the general hose routing:
    http://www.mightyram50.net/vbulletin...vacuum+diagram

    Plus here's another below that shows the color coding of the hoses and 'T's. It's for the 2.6L engine but most of it should apply to the 2.0L. If you find a difference, just ask.

    I believe some 'T's may have restricted ports, so if the owner didn't provide them, you may have to get them and the hoses from a wrecking yard. Good luck.

    Found the diagram for the California 2.0L, the lower one below.

    Vacuum_Hose_Routing_2.0L_Cal.jpg
    Attached Images
    Last edited by FMS88; 04-06-2020 at 09:49 PM.

  2. #2

    Array
    Status
    Offline
    Join Date
    08-29-2016
    Posts
    253
    Location

    Siskiyou County, CA
    Vehicle

    1987 Dodge Power Ram 50
    Engine

    G54B
    Quote Originally Posted by FMS88 View Post
    Welcome to the site. Here's a post with the general hose routing:
    http://www.mightyram50.net/vbulletin...vacuum+diagram

    Plus here's another below that shows the color coding of the hoses and 'T's. It's for the 2.6L engine but most of it should apply to the 2.0L. If you find a difference, just ask.

    I believe some 'T's may have restricted ports, so if the owner didn't provide them, you may have to get them and the hoses from a wrecking yard. Good luck.
    Wow! that has to be the most detailed vacuum diagram on the vacuum setup I have seen, sorry for the quick threadjack but what book is that from? my factory chrysler books only show the functional schematic showing how the system works. unfortunately it appears that the OP is in comifornia like me and almost all counties except 2 or 3 require smog inspections every 2 years with all counties requiring it upon transfer of ownership. I might have some extra vacuum line stuff if the OP cant find a complete vacuum harness although everything I have has came from the 2.6L and I am unfamiliar with the 2.0 so I may not have everything needed for it

  3. #3

    Array
    Status
    Offline
    Join Date
    07-23-2018
    Posts
    482
    Location

    Seattle, WA
    Vehicle

    1988 Dodge Power Ram 50
    Engine

    G54B
    Quote Originally Posted by StarquestMan View Post
    Wow! that has to be the most detailed vacuum diagram on the vacuum setup I have seen, sorry for the quick threadjack but what book is that from? my factory chrysler books only show the functional schematic showing how the system works.

    The diagrams are from a Chrysler training programs book I found on eBay some time ago.

    Manual_1.jpg


    Only covers 1987 and 1988, but probably applies to 1989, too. Includes sections for the Colt, Colt Vista, (Ram) D50 Truck and Ram Raider. I've created a compressed Word Doc of the D50 Truck pages, but at 28mb it's too big to upload. I'll add it once I reduce it's size.

  4. #4

    Array
    Status
    Offline
    Join Date
    08-29-2016
    Posts
    253
    Location

    Siskiyou County, CA
    Vehicle

    1987 Dodge Power Ram 50
    Engine

    G54B
    Nice! ill have to add that book to my collection, you would think they would have included that info in the main manual but they did like to spread out everything into multiple books. threadjack over

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •