Quote Originally Posted by FMS88 View Post
I have a Hygrade FL87 float that's of no use to me. It's yours if you want it.
Regarding the ball in the float chamber, it sits in the channel in the bottom of the chamber shown in the first picture of your first post on 9/11/20. The ball is kept in the channel by two stamped strips of metal held in place by the two pins and screw/washer at mid-bottom of the chamber. In the event your grocery run takes a disastrous and unexpected turn, the ball pushes on either of the metal strips which in turn contacts the float stopping the fuel flow. I wouldn't worry about omitting the ball and definitely delete it if you don't have the metal strips. I've disassembled several remanufactured carbs and none of them had the ball and metal strips. Unless you do some serious 4-wheeling, omit it. Probability is in your favor.
I got the exact same float as a replacement but will stick with the original float, thanks FMS88...