Not 27's ....17's wth am i saying with the 27's typo. Seems like im gonna be the guy to get these rims i like. Are there any pics or videos of the t bar lifting on a mighty max or dodge d 50 power ram? Im not finding and visual aids anywhere. OK...well i did the t bar crank without any trouble. Jacked front end off the floor, marked my socket to be able to count the turns, pb blastered the threads and measured before i jacked it up. Cranked them both 4 turns and didnt get much lift. Cranked a bunch more turns and measured cranked and measured, now both sides are even at about 34 inches whole lotta turns and didnt test drive it yet. Must have turned 20 turns. Do i have to cut off bump stops? I only got an i nch and 1/4 on one side and 7/8 onthe other but they were uneven side to side and now they are even Can someone please advise me if i cranked them too much? Are the bump stops limiting my amount of lift? Havent seen them yet to observe if thry are holding me back. This ole mm only has 41K original miles on it. What a sweetie.