Weber carb - return spring woes

[charger_john]

Also try using WD40 or some other light spray lubricant on everything - cable inner, linkages etc. Minimise the drag needed to release the throttle back to the idle stop. I had to modify the return spring set up and throttle linkage on my 34DATA carb by taking the spring bracket and throttle linkage off the Mikuni, drilling a relocated mounting hole in the spring bracket and mounting it to the electric choke retainer. I was able to use the Mikuni throttle return spring and mount the linkage the same way the Mikuni had been set up.

Yup, custom fabrication!