Hub Flange Diameter

[SA22C]

Can someone please explain to me why everyone tells guys they need to bore Nissan/Chevy wheels out to 108mm in order to fit on our hubs? This is not meant to be contradictory or confrontational at all. I just do not understand where the 108mm's is coming from. []

[Salteen]

idk, i kind of want an answer too lol.

[SA22C]

As shown in the above photo, the size of the hub mounting flange is actually 93mm. The bore on stock wheels is 93.6mm. if you were to bore a Chevy or Nissan wheel,93.5mm would be ideal. They would center perfectly on the hub and hub rings wouldn't be required.

[pennyman1]

88 up GM truck 6 bolts are 88 mm bore, so that is not a bad amount to bore out. May need bulged lugnets depending on year of GM wheel used - 12 vs 14 mm

[B-Line]

4x4 hubs are larger than rwd trucks. You need 108 to clear the front hubs.

[Salteen]

oh that makes sense

[SA22C]

Do 4x4 trucks utilize different rear axles and brakes?

[Salteen]

yeah the rear on the 4x4 is 8" 7.5 on the 2wd. the 4x4 does have drums, like 12 or 13" drums

[B-Line]

Yes 4x4 is larger on both the front and rears.

[claych]

Thanks again SA22C.
For context Honored Posters Who's info is accurate ???