I had to pull my engine back in July due to a (crappy rubber) freeze plug popping out, overheating, and subsequent head cracking.

I've FINALLY got the motor back together (new rings, bearings, seals, metal freeze plugs, heads studs, and gaskets).

I've got everything in place including all the vacuum lines, but I have two wires with shrouded female type spade connectors. One wire is yellow with a red stripe, the other has the identical connector but the wire is thicker and is brown with a yellow stripe. One wire must go to the starter solenoid to activate the starter, but which one and where does the other wire go/come from?

Thanks!
Chris