Results 1 to 3 of 3

Thread: HALP! Bagged and bodied build on 20s

  1. #1

    Array
    Status
    Offline
    Join Date
    11-24-2019
    Posts
    2
    Location

    Lancaster, PA
    Vehicle

    1988 Dodge Ram 50
    Engine

    G63B

    HALP! Bagged and bodied build on 20s

    Hey, guys! I have been building an '88 Ram 50 for a couple of years. It's bagged on the stock arms with triangulated lower arms with stock steering and drop spindles. It's traditional body dropped 2 1/4" with a side tilt bed. I built the truck to lay on a 25" tall tire.

    The problem I have is now I'm trying to fit 20s, the toe is all over the place. Can anyone please send me a link or info on how people have made this work in the past?

    I'm looking suggestions on wheel size, custom steering or suspension arm setups. Please HALP!!!

  2. #2

    Array
    Status
    Offline
    Join Date
    01-09-2020
    Posts
    216
    Location

    Saluda SC
    Vehicle

    1987 Dodge Power Ram 50
    Engine

    G54B-T
    take it to an alignment shop, if its that bad. if that doesnt work i would check your tie rods, you may have some worn out tie rods. i wouldnt think this, but your knuckle housings might be loose as well. i have soon this ONCE on a bagged 36 chevy sedan converted into a truck.

    or really just check for cracked/worn out suspension parts, because if pretty much anything in the suspension is worn out or broken its gonna throw it way outta wack.

  3. #3

    Array
    Status
    Offline
    Join Date
    01-09-2020
    Posts
    216
    Location

    Saluda SC
    Vehicle

    1987 Dodge Power Ram 50
    Engine

    G54B-T
    one guy had his rims bored to 108 on a 2wd, it was supposed to be 93, and it wobbled at speed. i would check into that

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •