Quote Originally Posted by B-Line View Post
Another Update:

All of you 1990-1995 4x4 V6 owners now have a new Hydraulic Clutch Line replacement. We were inspecting our 91 4x4 and decided to tackle this project as well. Good thing we did, because this line was already showing some severe cracking in the line as well as right at the fitting. What is worse is that there is some bubbling in the line from heat. Yes, it got so hot that it caused the rubber to liquefy. We are confident this is due to its proximity to the exhaust and its excessive heat.

OLb7fjO.jpg

CSbkx1I.jpg



Good news is we have the correct solution and replacement. One that wont deteriorate.

0SJjwGI.jpg



You will need to reuse your banjo fitting clip and bolt, but we will get you new retainers and brass washers.

7tW20Iw.jpg

aYq9INP.jpg

rroVHQ9.jpg


cp5ttK1.jpg

cp5ttK1.jpg

Yes!!! PM incoming. So this will fit all 90-95 4x4 V6? And i only need to reuse my bolt and what looks like an alignment clip correct? Glad you are throwing in the crush washers too as I tend to lose mine the second I pull mine off the car.

Funny thing you mentioning the heat issue. Now that im running the 3.8 MIVEC im sure its getting toasty. Really hope this firms up the pedal too.

PM inbound and again thanks for offering these!