I seam to remember a thread that covered what LSD will transplant into the max 8" rear end but now I can't find it.. Can some one point me in the right direction or give me a list of donors that have a compatible LSD.
I seam to remember a thread that covered what LSD will transplant into the max 8" rear end but now I can't find it.. Can some one point me in the right direction or give me a list of donors that have a compatible LSD.
Fyi for any one else that may come across this in a search. it was not a thread it was one of the wiki write ups..
http://www.mightyram50.net/vbulletin...ion:Gear+Ratio
Powerbrute LOM83 is the same as the factory Mitsubishi LSD, available on Ebay and Amazon. Just be sure to check for the proper spline count, as the 4 cylinder and V6 4x4 trucks have different spline counts
Pennyman1
The best Dodge that Dodge never made
Living the D-50 lifestyle since 1980
Can you verify the 4Cyl is 25 tooth spline and the 6cyl is 28 tooth spline.. I have deduced this from the information of what people have swapped in but I have not found any post where some one says straight up what the tooth count is.. I wanted to tare a spare 4cyl rear end apart this weekend and count the teeth but ended up having to work because some prick decided he needed to shoot some of our comm cables with a shot gun!!
Sam
Laid up at the moment - maybe someone else can help here?
Pennyman1
The best Dodge that Dodge never made
Living the D-50 lifestyle since 1980
Bookmarks