Results 1 to 17 of 17

Thread: New EFI Option

  1. #1

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64

    New EFI Option

    I have decided that I will be using the Speeduino System to control my EFI and Turbo set-up for next year.

    I will document the entire process. There is already a module in the system for the 4G63 that I might be able to use as a starting point.

    The entire Kit is under $200 AUS.

    https://speeduino.com/wiki/index.php/Speeduino

    For those interested, there are a lot of great videos about the project on YouTube.

    https://www.youtube.com/results?search_query=speeduino

  2. #2

    Array
    Status
    Offline
    Join Date
    09-24-2019
    Posts
    235
    Location

    Nevada
    Vehicle

    1991 Dodge Power Ram 50
    Engine

    6G72
    I've heard a little about these. How easy are they to set up and how reliable long term?

  3. #3

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    They have a complete PC interface which is the same to tune as most high dollar setups.

    This is an open source project that already has 4 years of tests.

    I know I will substitute all of the electrolytic caps with the high end caps... been there done that with cheap caps.

  4. #4

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    Never knew this existed. Thanks for posting
    support the forum that supports you - join and donate to MightyRam50.Net today! donations unlock the edit function

  5. #5

    Array
    Status
    Offline
    Join Date
    09-24-2019
    Posts
    235
    Location

    Nevada
    Vehicle

    1991 Dodge Power Ram 50
    Engine

    6G72
    Right in your back yard too.

  6. #6

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I hope this is a great alternative. If i had to place to work on my truck during the upcoming winter I would have it done by spring...

  7. #7

    Array
    Status
    Offline
    Join Date
    10-22-2019
    Posts
    24
    Location

    Morgan City, La
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    G64B
    Nice.. I think I am going to jump on board with this too!!

  8. #8

    Array
    Status
    Offline
    Join Date
    10-22-2019
    Posts
    24
    Location

    Morgan City, La
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    G64B
    So we can't use the tune form the 4G63 as they run coil pack "well at least not easily" I found that out today on their forum..

    Also the system does not work with knock sensors..

    I will likely still give it a go. Just lower down the list now..

  9. #9

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    Possible this would be a great way to upgrade to coil packs..

    I was thinking about adding the 4G63 crank trigger
    https://electromotive.com/our-produc...k-trigger-kit/ feeding the unit for timing then have it output to a set of coil packs.

    I'm just unsure if I would still need the cam position sensor located in the dizzy.

  10. #10

    Array
    Status
    Offline
    Join Date
    09-24-2019
    Posts
    235
    Location

    Nevada
    Vehicle

    1991 Dodge Power Ram 50
    Engine

    6G72
    If its missing those circuits, as well as the base programming. DSM for 4Cyl or 3000Gt for the V6 guys seem to be a quicker and easier transition.

  11. #11

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    It has a self learn for base mapping. That is why I think I will use GM electronics ( GM Mass Air, GM Throttle Body with adapter, 3 bar GM Map sensor)... then I can probably get by with a base GM set up.

  12. #12

    Array
    Status
    Offline
    Join Date
    10-22-2019
    Posts
    24
    Location

    Morgan City, La
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    G64B
    I have a 6 bolt block that I have installed a oil pump on that has provisions for a crank sensor.. Only thing is I will not have it ready to test any time soon. If you use the CAS in the distributor it should be no issue..

    The next bad thing is that block was supposed to be a turbo block and this project does not work with knock sensors..

  13. #13

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    Stay light on the timing and keep it fat and you don't need a knock sensor...LOL

  14. #14

    Array
    Status
    Offline
    Join Date
    10-22-2019
    Posts
    24
    Location

    Morgan City, La
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    G64B
    Yea I was kinda thinking that. I don't know why they have not got it working with the knock sensor yet.. I read over a bunch of threads and they were talking about using sound files to processes the signal from the knock sensor. I though the oem just looks for a small voltage signal from the tuned piezoelectric pickup to detect knock.

    I still want to play with this project I just need to get a few other things out the way first..

  15. #15

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I grabbed the 2 bar map sensor and the fuel injectors from the 3800 that I took the blower from. I'm currently making a pulse machine so that I can clean them by pulsing the injectors.

    I will have to research the injectors to see if I can run them on the truck. The 3800 made about 8 psi of boost max which is all I want to run.

    I'm also tempted to grab the coil packs too from the engine and see if i can make them work also.

  16. #16

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    418
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    Anyone do anything with this over the winter?

  17. #17

    Array
    Status
    Offline
    Join Date
    06-29-2020
    Posts
    1
    Location

    Ashburn, Virginia, USA
    Vehicle

    1995 Dodge Ram 50
    Engine

    6G72
    Hello...i have the same setup on my small engine. In my setup, EFI integrated to throttle body. Mainly for up to 15000 rpm 2-strokes, though 4 strokes and wankels supported. Very efficient power supply to minimize electricity consumption and heating
    Enclosure milled alum case with central hole. It is bolted to throttle body by fed screws.At the center of board located magnetic sensor to perform contactless TPS functionality.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •