some run other rocker ratios on the 2.6. No measurable gain. SOHC higher rpm magic is in the camshaft
oz/nz cam quality control better than usa cam regrinds, from my obsevations. Most 2.0 sohc staz run Camtech, Wade or Crow

One of the most impressive 2.6 street starquests got his cam all the way from oz, Totally changed the charcteristics
Sourced from a 2.6 drag racer. Ran a 12.4 sec using a t3/t4(60-1) @13psi only! Instant spinup, tire fryer. Flatout works


Schnieder is most popular starquest cam, but generally not impressive gains. Their valve springs too weak also, but cheap
One starquester meticulously measured his. None of the lobes matched the cam card. Got into it with Schnieder
Finally they gave in, supplied another regrind. Picked almost 100hp!! on the same setup. Lobes measured matched cam
Schnieder CAN perform.... but no telling what you'll get in the mail. Shouldn't have to go thru all that crap imo


Years back when DSM guys were looking for the benchmark HKS cam equal, Crower & Web cams failed to deliver
Deltacams.com seems to get the DSM cams "right", and at a considerably lower cost
I would have no problem sending my cam to that usa regrinder.
Starquest 2.6 veterans run beehive springs. Austarion guys will have alternatives too, no doubt