Ok I put a new clutch and throw out bearing in. Now I have no pressure on the pedal. I got under the truck and can move the lever on the trans with my hand. Feels like some thing came apart in the bell housing probably. Also, when I put the trans back in the bearing fell out of the hole for the reverse switch. We noticed something wring when the reverse lights were on when the key was on. I found the bearing and put it in today and the reverse lights are still on. Any idea why the clutch isnt working before I take the trans out again and the only thing I can think of with the lights is they might be plugged into the wrong connectors if that makes any difference. Kinda frustrated with this thing right now.