Results 1 to 3 of 3

Thread: Auto Trans Shifting

  1. #1

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    317
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64

    Auto Trans Shifting

    Right now my truck falls on it's face at 4500 rpm. While I'm rarely there... it is quite a pain to pass someone and barely hit the 5000RPM that the truck will auto shift into third... even manual shifting doesn't help the case.

    I have adjusted the kickdown and the truck STILL will only shift at full throttle at 5000RPM!!!!

    I'm assuming that is in the governor and there is no way to adjust a lower shift point?

    Last year at the Mopar Day I couldn't even get to 3rd gear as the truck takes forever to get to 5000 rpm.

    If the truck would shift at 4200 RPM this truck would be MUCH happier.

    1991 ram 50 2.4 auto.

    I'm assuming this tranny basically has A518 internals with a Mitsh cast case.

  2. #2




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,758
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    actually an a500 tranny with Mitsu specific bellhousing. Sounds like the kickdown still is not set right. should have just a slight bit of slack at curb throttle setting.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  3. #3

    Array
    Status
    Offline
    Join Date
    06-27-2015
    Posts
    317
    Location

    Bothwell,Ontario
    Vehicle

    1991 Dodge Ram 50
    Engine

    4G64
    I adjusted it to this. I will let you know how it works out.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •