Results 1 to 4 of 4

Thread: Engine locks up after it runs for a bit.

  1. #1

    Array
    Status
    Offline
    Join Date
    03-03-2019
    Posts
    5
    Location

    Loganville, Ga
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    4G64

    Engine locks up after it runs for a bit.

    After getting the max from blown head gasket setting in the woods for a few years to running and driving the over heating and engine locked down. Sat for a year again. Now i got her home got the engine broke free and with the plugs in the right order she fired up. Ran for a few seconds and i shut her off. Changed the oil with some old(saved from my last oil change) and let her ideal for several minuets everthing seemed ok. Shut her off then went back out a few hours latter she cranked right up ran for about 30 seconds then just locked down real quick. Put a breaker bar on the crank and she is backed to locked down. About to just junk her but would really like to get her up and running. Any ideas?

  2. #2

    Array
    Status
    Offline
    Join Date
    03-16-2018
    Posts
    341
    Location

    Raymond New Hampshire, USA
    Vehicle

    1989 Dodge Ram 50
    Engine

    G54B
    Pull the plugs and check to see if it is hydro locked?

  3. #3

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    support the forum that supports you - join and donate to MightyRam50.Net today! donations unlock the edit function

  4. #4

    Array
    Status
    Offline
    Join Date
    09-05-2018
    Posts
    79
    Location

    Christiana, PA
    Vehicle

    1986 Dodge Ram 50
    Engine

    Dodge V8
    Second on the hydro locked

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •