Lines didnt come out great, but i want to put in a cooler eventually,
so ill probly run a -AN hardline adapter on the return fitting and then i can
plumb in a nice cooler...
20190508_131844.jpg 20190508_131901.jpg
now the left hand side is gonna be tight with the ecu, LHD blower motor assmbly,
and LHD heater box. im going to have to make some very slick, low-profile ducting
to hook up the blower outlet which is up against the A-pillar/firewall corner,
and the heater box inlet which is on the right hand (now drivers side)
20190508_122817.jpg 20190508_123712.jpg 20190508_123644.jpg
20190508_123705.jpg
these others are of the harness on the Right side, its gonna fit nicely.
ive only got to lengthen the interiour light wires, maybe a couple others...
20190508_123845.jpg 20190508_123927.jpg 20190508_131615.jpg
20190508_131751.jpg 20190508_131826.jpg 20190508_131835.jpg
20190508_131844.jpg
still need to mod the brake pedal, clutch pedal needs tweeking, and im going to tryin
replikate a RHD throttle pedal. hafta make 1 more brake line to connect the rears up, ive yet
to delete the rear ABS can or prop valve...
more pics soon.