Quote Originally Posted by WarStryker13 View Post
Murphy's law strikes again. The distributor wires from the ICM to the coil have broken off at the ICM connectors, and the rubber grommet is cracked and falling apart.

Now I get to look for a new set of wires, or at least a good used set...
Looking at this https://www.rockauto.com/en/catalog/...ule+(icm),7172
And this https://www.rockauto.com/en/catalog/...stributor,7108
It looks like to me yiou can probably just get new wire of the right gauge and make your own since they do not seem to be physically attached to the ICM but rather bolted to it with end connectors.
I sent a PM with the same advice before I saw this post.