There might be a thread already on here about this..I need to flush and replace my radiator on my 88 power ram 50 2.6L....not sure if you can state the auto parts store that has this but they say that the liland global all aluminum radiator will bolt into my truck...Part # 188AA...Does anyone know if this is correct?
I installed the Liland aluminum radiator in my '88 4x (manual trans) a year ago. Pretty much a piece of cake. The only adjustments needed were to the overflow hose and the fan shroud. The overflow tube at the Liland radiator neck pointed toward the battery. I replaced the original tube with a longer one and routed it to the overflow bottle. The hose fit nicely between the radiator top and the fan shroud. I also had to drill new mounting holes in the shroud because the bolt holes on the Liland are to the inside of the radiator sides. On the stock rad, they were to the outside.
Ok..so basically a bolt on...was it the plastic shroud you had to drill or the radiator.
I had to drill the shroud, which on mine is metal. The radiator side rails are constructed to accept a fan shroud without modification so you don't have to mess with the radiator. If you have a plastic shroud, the mount points might match the radiator's pattern. You'll have to find out and adjust the shroud accordingly.Originally Posted by nsman
Ok..thanks..my shroud is plastic...will see how it fits...does the radiator cap come with the radiator or do you need to order one?
It doesn't come with a cap. It takes the smaller diameter, 13 psi cap.
I run an oversize Flex A Lite electric fan (model 30) and clearance is a bit tight. Is this radiator the same approx. thickness as the stock one? Thanks for this informative post!
The Liland 188AA is 2-3/8" thick based on the width of the side rails that have the mount holes for the radiator and a shroud (or fan?). I don't have a stock radiator to measure, but I'd bet this dimension is greater on the Liland which could make your tight situation a bit tighter.
Posting Permissions
Reply With Quote
Bookmarks