Results 1 to 11 of 11

Thread: Front suspension

  1. #1

    Array
    Status
    Offline
    Join Date
    06-30-2018
    Posts
    8
    Location

    Somerville Alabama
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    I.D.K.?

    Front suspension

    So I found some lift blocks for the rear that range from 1 inch to 5.5 inches. 5.5 inches to me is a bit much but maybe 1.5 to 2 inches would work. My question is what can I do to front suspension to match the rear I drive a 94 mighty max 4 wheel drive 3.0 liter v6. I found some coil spacers as well but don't really know if that is in front or rear and if that would give me any lift at all. Thanks

  2. #2

    Array
    Status
    Offline
    Join Date
    06-30-2018
    Posts
    8
    Location

    Somerville Alabama
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    I.D.K.?
    Also I found energy suspension but I'm not sure what those parts would do

  3. #3




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    These trucks are torsion bar fronts for 4wd - go here for new torsion bars to let you raise it up: http://adventuredrivendesign.com/oca...berian+Bushing
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  4. #4

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    To be on the safe side I'd use a combo of frame/chassis spacers + suspension mods so it doesn't screw with the geometry as much.
    support the forum that supports you - join and donate to MightyRam50.Net today! donations unlock the edit function

  5. #5




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    they also sell body lifts for both 1st and 2nd gen trucks...
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  6. #6

    Array
    Status
    Offline
    Join Date
    06-30-2018
    Posts
    8
    Location

    Somerville Alabama
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    I.D.K.?
    Where can you find the body lifts? What's the brand ?

  7. #7

    Array
    Status
    Offline
    Join Date
    08-11-2012
    Posts
    1,199
    Location

    Oakland, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    G63B

  8. #8

    Array
    Status
    Offline
    Join Date
    06-30-2018
    Posts
    8
    Location

    Somerville Alabama
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    I.D.K.?
    Will I be able to clear 33 inch tires with just the body lift?

  9. #9

    Array
    Status
    Offline
    Join Date
    01-24-2017
    Posts
    1,209
    Location

    New Zealand
    Vehicle

    1981 Mitsubishi L200
    Engine

    Other
    Hey check the John baker catalogue in the manuals section he lists all possible tyre sizes with standard, lifted, and flared trucks

  10. #10

    Array
    Status
    Offline
    Join Date
    06-30-2018
    Posts
    8
    Location

    Somerville Alabama
    Vehicle

    1994 Mitsubishi Mighty Max
    Engine

    I.D.K.?
    Where can you find torsion keys for our trucks

  11. #11




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    there are no keys for these trucks, just adjust the screws on the bars - you need new torsion bars to get more lift, and swap the ucas for a 2nd gen Montero (not sport) to maintain camber.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •