Going to be changing my gas filler neck in the next week or so . My old one IS rotted out . Is there an easier way without having to drop the tank to get to it ??
thanlks
maxdsm
https://www.fillernecksupply.com/d50...SABEgKyW_D_BwE
Going to be changing my gas filler neck in the next week or so . My old one IS rotted out . Is there an easier way without having to drop the tank to get to it ??
thanlks
maxdsm
https://www.fillernecksupply.com/d50...SABEgKyW_D_BwE
Last edited by maxdsm; 05-06-2018 at 10:43 AM. Reason: pic added
If it's anything like the Gen 1 - no. It will make your like easier with getting to the clamps anyway. And you can give the tank a big clean and inspection while it's out.
support the forum that supports you - join and donate to MightyRam50.Net today! donations unlock the edit function
either that or pull the bed - neither is a simple choice. Is it the metal neck or the rubber hose?
Pennyman1
The best Dodge that Dodge never made
Living the D-50 lifestyle since 1980
rubber hose and thanks .
Shouldn't have to drop the tank. I just replaced the hose going from the tank to the filler neck. The clamp on the top of the tank was a bit difficult but not impossible to get loose. As for the filler neck itself there should be a panel on the inside of the bed you can pull out to help make removing the filler neck easier.
Excellent advice thank-you . Attempting this weekend .
Replaced this weekend was a breeze . Dropped the tank (4 bolts) and removed tire and panel which made it very simple. Thanks Again everyone for the fast replies.
Also found I needed to change the return line gas filter .
Bookmarks