Quote Originally Posted by geezer101 View Post
Other thing is the ICM but before you look at that (module in the distributor) check that you are indeed getting spark - if you can get it to turn over. Joys of motoring...
so i have done quite alot since this last post. i got the truck to turn over and eventually run. the carb was pissing me off so i got a weber k614 and a carter 4070 and installed both. after i did all this im back to the starter motor just clicking and now the coil is not getting power. there is power to the coil but the resistor doesnt have any power to it, the dash lights stopped working and there is a clicking noise in the distributor from the ICM module. so i belive i have a short and maybe a bad ICM