Results 1 to 25 of 25

Thread: Pix of a few High Performance Modifications

Hybrid View

  1. #1


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other

    Pix of a few High Performance Modifications

    Since there isn't anything in here and I have a fairly high preformance Mighty Max I'll go first.

    In the beginning, behold the Stock Mighty Max



    Roll Cage work



    Engine painted & assembled, & timed, Notice the Balance Shaft Delete.



    The Intake with the long runners removed and re-welded Flange



    10:1 compression piston with Heat coating on top and slick coating on the sides



    AEM EMS where the stock ECU used to be



    Rewiring the engine bay for the Dual Coil and Eclipse Throttlebody



    Turbo and Intercooler installed



    Tuff Pan Plate to strengthen the Tranny



    Quartermaster Twin Disk Clutch and highly modified aluminum Flywheel to accomodate it.



    Package ready for delivery



    Fluidyne radiator to keep things cool.



    On the trailer after a week of racing at Bonneville



    Awards won


  2. #2


    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    674
    Location

    Stafford, VA
    Vehicle

    1995 Mitsubishi Mighty Max
    Engine

    Chevy V8
    that is some serious work right there!
    how many hp was that set up capable of...

    any estimate on money invested in that build...that is crazy
    great job.. i bet that is one hell of a ride....

  3. #3


    Array
    Status
    Offline
    Join Date
    03-21-2011
    Posts
    767
    Location

    WA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    Your truck makes all of us other turbo trucks look slow. Lol. So how was this past season mike?

  4. #4


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other

    Smile

    2010 season I upped my official record at Bonneville to 154.961 MPH, My qualifying run was 159.891 MPH. My return Run which is averaged with the qualifier was obviously much slower. Last weekend I upped my record with the ECTA in North Carolina to 144.453 MPH in the Mile.

    How Much $, well you could say too much. I've been doing LSR for 11 years. I totally destroyed the blue motor, salvaged as much as I could from it and built the red motor, toasted it once but saved everything but the pistons, then went Turbo, then broke the tranny, fixed & upgraded that, broke the clutch, fixed & upgraded that, overheated the system with a stock radiator, (what was I thinking) upgraded that. Not to mention the Roll cage, fire systems, parachute, Firesuit, helmet HANS device and all the other stuff for safety.

    Remember this is a dedicated race Truck, not driven on the street (well around the block after a major re-work) I post this stuff up to give you guys ideas and show what has been done. Everybody's truck is special and has it's own uniqueness.

    If I had to choose the most exotic Modification, it would be the AEM and Eclipse Dual Coil and Throttlebody, eliminating the distributor. I was told (by those who will remain nameless) it couldn't be done. Yeah, right!

  5. #5


    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    674
    Location

    Stafford, VA
    Vehicle

    1995 Mitsubishi Mighty Max
    Engine

    Chevy V8
    thats very cool. It inspires me just to keep on with it and not to give up. I am doing sbc swap in my truck....hmmmmm maybe i should build for boost> im not a turbo type of guy..but it sounds fun

    yeah i know all about the cost how you rebuild alot or break shit. My family has been long time drag racers since the 60's. '
    Franklin motorsports- pro stock, funny car, top fuel, road course, all kind of racing, its very expensive, they built a 95 dodge avenger 2.0 that is pushing mid 300hp all motor.

    its for sale....

  6. #6

    Array
    Status
    Offline
    Join Date
    04-06-2011
    Posts
    482
    Location

    Jacksonville, FL
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    G54B-T
    You're an animal!

    How about the rear end setup.

  7. #7


    Array
    Status
    Offline
    Join Date
    03-21-2011
    Posts
    767
    Location

    WA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    You should post up a link in the links section for the tuff pans. That is a great trans pan from what I've researched.

  8. #8

    Array
    Status
    Offline
    Join Date
    05-01-2011
    Posts
    30
    Location

    Killingworth CT
    Vehicle

    1993 Mitsubishi Mighty Max
    Engine

    4G64
    Any videos of this thing running the salt flats?

  9. #9

    Array
    Status
    Offline
    Join Date
    05-07-2011
    Posts
    11
    Location

    Asheboro, NC
    got a few ?s about the intake,
    whats the benefits of the manifold like that?
    did you rework it or did someone else ?
    if you did how hard was it?
    and i gotta add thats an amazing truck,

  10. #10


    Array
    Status
    Offline
    Join Date
    04-04-2011
    Posts
    712
    Location

    Columbus, OH
    Vehicle

    1992 Mitsubishi Mighty Max
    Engine

    Other
    It's a specific application, the long runners of th stock manifold give you low end Torque, for the stump pulling a truck is supposed to do.
    What I'm doing doesn't require it, Short runners, or more of a Plenum is for High end Horsepower. It is a desired type of intake for a Turbo application.

    I Cut the runners out with a Sawsall, The guy who did my head work had the flange welded back to the tank and then matched all the port sizes.

    Thank you.

  11. #11

    Array
    Status
    Offline
    Join Date
    04-01-2011
    Posts
    155
    Location

    Garden Valley, CA
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    6G72
    hey mike if your still looking for the 3000gt diff look up http://www.msrecycling.com/mitsubishi/3000gt.htm they also ship.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •