Results 1 to 5 of 5

Thread: 3rd time is a charm where do these hook up

  1. #1

    Array
    Status
    Offline
    Join Date
    11-14-2017
    Posts
    118
    Location

    Kellogg, Idaho
    Vehicle

    1990 Dodge D-50
    Engine

    4G64

    3rd time is a charm where do these hook up

    I have tried to post this question twice but some how the post never shows up. Lets hope I do it right this time.

    I need help identifying where some wires and hoses go.

    1. First one is a vacuum nipple coming off the back of the intake manifold. Plug it or run it to where?

    2. Center hose fitting on canister, leave open or run a vacuum line to ?

    3. IMG_20171210_172023480.jpg The wires shown are cut and the other side of the plug is empty. I have a single cut wire on the harness that is cut and hanging not sure if it goes to this but where do these 2 wires go?


    4. On the passenger fender wall is a single black wire near the plug wire for the air filter canister. it has bee cut and is hanging. where does it go.

  2. #2



    Array
    Status
    Offline
    Join Date
    03-16-2011
    Posts
    3,803
    Location

    Sacramento, CA
    Vehicle

    1979 Dodge D-50
    Engine

    Chevy V6
    Members come and members go, But the board keeps track of them.
    Find me on FaceBook
    clicking HERE.

    Or look on YouTube Click Here.
    http://mobilemillwright.com

  3. #3

    Array
    Status
    Offline
    Join Date
    06-15-2014
    Posts
    6,059
    Location

    Adelaide, South Australia
    Vehicle

    1985 Mitsubishi L200
    Engine

    G63B
    Looks like your engine is the 4G64 (2.4). The black module is a power transistor. Not super helpful - I've had a McGoogle for images etc but that 2 pin connector doesn't come up.

  4. #4

    Array
    Status
    Offline
    Join Date
    11-14-2017
    Posts
    118
    Location

    Kellogg, Idaho
    Vehicle

    1990 Dodge D-50
    Engine

    4G64
    Well i've figured out some of the issues. Here is what I don't know yet. In the photo you will see a wire hanging behind the 2 cut wires. It is either white with a red stripe or yellow with a red stripe. Now idea where it goes. I think the 2 cut wires are for an EGR temp sensor. Can't find any data to tell me where this would be located. Finally the vacuum nipple on the intake might be for cruse control so I'll just plug it.

  5. #5

    Array
    Status
    Offline
    Join Date
    01-24-2016
    Posts
    46
    Location

    az
    Vehicle

    1987 Dodge Ram 50
    Engine

    G54B
    Yes the 2 wires in your pic are the EGR temp sensor. Maybe you will get lucky and find one at a you pull it yard that some one cut the connector off of. Otherwise it is off to the parts store for you... or RockAuto...

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •