Hello everyone I am new to the site and new to the Mitsubishi Mighty Max pickups. I had a 1994 Mitsubishi Mighty Max single cab 2 wheel drive truck with a 2.4l 4 cylinder fuel-injected motor and 5 speed transmission. I then found a 1989 Mitsubishi Mighty Max Macro Cab 2 wheel drive with a 2.6l 4 cylinder carbureted motor and a automatic transmission on the column. I decided to fix up the Macro Cab or extended cab. The 2.6l engine in the 1989 was missing a lot of parts like the head, valve cover, carburetor and so on. So I decided to use the 2.4l out of the 1994 and bolt it to the automatic transmission that was in the 1989. The problem I am having is the original flywheel that is bolted to the 2.4l engine from the 1994 also has a plate attached to it. Once I bolt up the torque converter then I don't think I will be able to bolt the transmission back up. I saved the flywheel from the 2.6l engine and thought that might work, but the bolt holes will not line up. My question is does anybody have a part number to a flywheel I could buy that will work with the 2.4l 4 cylinder fuel-injected engine and automatic transmission on the column?
Bookmarks