Results 1 to 2 of 2

Thread: Parking brake replacement

  1. #1

    Array
    Status
    Offline
    Join Date
    10-31-2017
    Posts
    14
    Location

    Ct
    Vehicle

    1990 Mitsubishi Mighty Max
    Engine

    4G64

    Parking brake replacement

    Not sure if im posting in the right area but im looking for a walk through or guide on replacing the parking brake cable any help would be greatly appreciated thanks ahead of time!

  2. #2

    Array
    Status
    Offline
    Join Date
    01-24-2017
    Posts
    1,209
    Location

    New Zealand
    Vehicle

    1981 Mitsubishi L200
    Engine

    Other
    Hi, I have done the rear sections this year. Very easy
    Basically you want to jack up the rear, remove the wheels and drums. I removed the end closest to the cab first by removing a split pin on the pivoting section.
    With that end loose you should be able to get some slack on the cable inside the drum and remove it from the lever.
    The cable outter can be removed by squeezing and pushing on the end that's inside the brake plate. I used some pliers, but knocking a socket over it might be better. I had 2 brackets, 1 on the leaf spring and one near the gas tank. Be prepared to replace the bolt on the one on the spring

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •