Results 1 to 4 of 4

Thread: Wheel Fitment

  1. #1

    Array
    Status
    Offline
    Join Date
    05-25-2017
    Posts
    16
    Location

    SPOKANE, WA
    Vehicle

    1988 Dodge Ram 50
    Engine

    G54B

    Wheel Fitment

    Hey all. So i found a pretty good deal on some 15"x10.5" wheels and 31" tires mounted with about 60% tread left for $400. Just wondering if i will need to modify anything to make 10.5 fit. I know i will need to lift the truck a bit to get the 31's to clear.

    Any info on this would be much appreciated!

  2. #2

    Array
    Status
    Offline
    Join Date
    06-12-2015
    Posts
    185
    Location

    Owensboro, KY
    Vehicle

    1991 Dodge Ram 50
    Engine

    4D56-T
    31x10.5 tires will rub bad up front,they should clear OK in the rear, but to make them fit in the front you will need a lift of some sort. You can always turn up the torsion bars but that will make for a stiffer ride.

  3. #3




    Array
    Status
    Offline
    Join Date
    03-20-2011
    Posts
    4,851
    Location

    Pittsburgh, PA
    Vehicle

    1980 Dodge D-50
    Engine

    G54B
    you also need to trim the inner wheel well to allow for clearance
    Last edited by pennyman1; 08-07-2017 at 04:02 PM.
    Pennyman1
    The best Dodge that Dodge never made
    Living the D-50 lifestyle since 1980

  4. #4

    Array
    Status
    Offline
    Join Date
    01-24-2017
    Posts
    1,209
    Location

    New Zealand
    Vehicle

    1981 Mitsubishi L200
    Engine

    Other
    mine are not quite that big, but they rub on the steering box and sway bar, livable by turning out the steering stops and losing turning circle, but its like driving a lowered car and rubs when going in driveways on an angle

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •