Thought about putting the Ute through its inspection next week, but there was a tiny rust hole on the opposite side cab mount. Figured I'd just knock it out beforehand. Got a replacement sill and the jigs for the mounts and floor ready to go, so should be straight forward.
IMG_20200319_151221.jpg
Same story, the drain hole was blocked totally with bog, so the body mount is rusting out. Looks like the inner sill has been messed with as it doesn't sit nice either.

IMG_20200319_151216.jpg
This looks worse in the photo than I believe it is. I have had a good look over the frame and this is the only pitted area, so I don't know what's going on. Some holes in the cab mount bracket itself but I think I can handle it. Plan on filling those pits and grinding flat, seems to work on hotrod frames, I don't think the frame will suffer in any way.

And... More of the same
IMG_20200319_152658.jpg
IMG_20200319_153106.jpg
Crappy repairs, lots of bog, bottom of the sill badly pitted and just bogged over. Won't bother digging any deeper, just going to cut it off and replace it