Well I don't know what I did, but this is what happened.
I replaced the diode and all the burned wires under the hood. After completing, I tried to test the fixes and the starter still twirled in ACC. I then decided to separate the column covers and check ignition. I noticed no burned wires. I switched out the switch with another one I had and it twirled the starter again. So, I removed the backup electrical switch I used to test with and replaced with the original one and tried it again. SURPRISE, the truck stopped twirling the starter and it was acting like it should. No more ACC starter twirling. I tried it several times and it fixed itself somehow. I am very weary of this at the moment because I would hate to have it start acting up while driving and burn wiring farther. But, at the moment the truck has repaired the issue and most likely by me moving wiring around in the steering column possibly.
I am going to start wrapping the wires I unwrapped back up and secure everything. Checking each step for a return issue. God works in mysterious ways and I hope I got a helping hand from above. We will see. I will update thread as soon as I complete putting it back together.