Results 1 to 3 of 3

Thread: Fire wall.

  1. #1

    Array
    Status
    Offline
    Join Date
    02-15-2017
    Posts
    31
    Location

    mass.
    Vehicle

    1991 Mitsubishi Mighty Max
    Engine

    4G64

    Fire wall.

    Before I drill to run control wires from the cab to the engine bay. Is the fire wall just one sheet of metal of a double. Also there are some rubber seals from the engine bay. Should I focus on one of them to run wire? Tanks for any help. Gs.

  2. #2

    Array
    Status
    Offline
    Join Date
    12-21-2013
    Posts
    998
    Location

    Maurertown, Virginia
    Vehicle

    1990 Dodge D-50
    Engine

    4G64
    Hey there, Gsprusty~
    I ran wires through the firewall, and I took advantage of going through the rubber plugs. I then applied some silicone sealer around the entry points, just for good measure.

    Having literally cut up a D-50, I can tell you that the firewall is flimsy and if memory serves me correct, it's just 1 ply. Even so, with the rubber seals, you can easily find your wiring inside the cab, though you'll probably have to pull the carpet back/down.

    My two cents

    "Death Of A D-50" in the Gallery shows the cutting up process http://www.mightyram50.net/vbulletin...hp?albumid=420
    The greatest gift you have to give to the world is that of your own self~transformation.

  3. #3



    Array
    Status
    Offline
    Join Date
    03-26-2011
    Posts
    1,499
    Location

    Vacaville, CA
    Vehicle

    1989 Mitsubishi Mighty Max
    Engine

    4G63-T
    It is just one piece except where it overlaps like the wheel well and tranny tunnel, etc... I would try to run it through a rubber grommet already there but you could always add one where ever you want to run the wires, but you NEED to make sure you run one so the wires don't get chaffed/cut.
    Josh
    09 BMW 335i E92 Twin turbo
    89 Macrocab 4g63 Turbo swapped & Bagged: Build Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •