Reviving to update. I had wired the new unit with both the power and memory combined. It was draining my battery over night. I had to remove the neg cable when I parked all summer while I used it. The truck has been parked all winter. Today I removed the dash cover and took out the radio unit. Turns out I could cut the power wire right there, soldered it to a new extension, tape it and soldered it to the back of the radio fuse on the fuse block. I left the memory wire connected to constant power. w/o reinstalling it I plugged it in without putting it back into the dash and it works comes on with the key goes off with the key. I've left the battery connected to see tomorrow if it has died. I have not put it back in yet i figure I might as well reset that mount I made so it seems like its more professional. OH yea it started pretty easily compared to how hard it has been when I let it sit in the past. I only had to pour gas into the carb once.