New developments with the ol' MM. Set the screws up with help from one of the other posts. Truck runs fine when warm. The issue I am having now is that in the mornings (cool but not super cold here) the truck refuses to drive. I let the truck warm up until temperature registers on the temp gauge then kick off the high idle. Everything works perfectly to this point. As soon as I start to drive it falls on its face like it is missing really bad. I have to put it in N and feather the throttle to keep it from dying. It will eventually idle on its own after this at about 300 RPM and super rough. It will eventually rise back up to about 800 then as soon as I set off again do the same thing. Eventually it will warm up enough to run just fine but it takes about 20 min to get to that point. Any advise?